Read more about the BLUE Tracer Light with EXP Additional Collar / Extra Receiver
Collar straps NOT included.
The Tri-Tronics Tracer Light is the first remotely activated dog collar light accessory. Whether you're running hounds at night, setting up decoys in the dark, or walking your dog in your
neighborhood after the sun goes down, the Tracer Light will make it easier for you and others to see your dog.
Turn the light on or off with a simple press of a button on your Tri-tronics Field or Pro transmitter. Choose between a blinking light or constant mode which is visible from up to 1/2 mile away.
To help keep up with multiple dogs, the Tracer Light is available in three colors: red, white and blue.
The Tri-Tronics Tracer Light is designed to fit any G-series (G3 EXP and G3) receiver. The Tracer light fits between the G series electronics and the removable battery pack.
Using the Accessory (A position) on any Field or Pro transmitter dial allows you to remotely turn the light on, turn the light off, and change it from a constant glowing light to a flashing light.
Tri-Tronics Sport Series transmitters that do not have the "A" position on the transmitter can activate the light and change modes at close range (1 to 2 inches) but do not have the ability to remotely change, turn off, or activate the light at a distance.
The Tri-Tronics Tracer light is the perfect accessory for folks that spend time outdoors at night with their dogs.
The Tracer Light is available for purchase as a single accessory, in a set with an add-on receiver, or included with a Trashbreaker remote trainer.
The Tri-Tronics Tracer Light is backed by a 30-day money-back, 1-year warranty. Made in the U.S.A.
How to Match Additional Tri-Tronics EXP Collars to Your System
Please read all steps before starting.
1. Install strap of the desired color on the new collar and charge new receiver for two hours.
2. Set transmitter dog selection switch to the color of the strap.
3. Set transmitter intensity dial to a number, not a letter.
4. Turn the collar on.
5. Press and hold collar on/off button, then press and hold a "continuous" transmitter button. Hold both buttons down for about 5 seconds - until you hear two quick beeps (ignore the long beep that sounds right away). Release both buttons.
6. The collar will now be set to match your transmitter, and will be turned off.
7. Check for a successful match by turning the collar back on and pressing a "continuous" transmitter button. The collar light will turn on. If you are not planning to use the unit now, turn the collar off after testing.
If the transmitter does not operate the new collar, try the procedure again. If you are still having trouble, you can call Tri-Tronics Customer Service Department at 1-800-456-4343 for help.
Note for Classic 70 G2 EXP or Trashbreaker G2 EXP: When adding a receiver for dogs 1 - 3, use the button that matches the strap color and place the dog selection switch in the UP position. When
adding a receiver for dogs 4 - 6, use the button inside the colored circle that matches the strap color and place the dog selection switch in the DOWN position.
Buy BLUE Tracer Light with EXP Additional Collar / Extra Receiver
Help me choose:
Collar straps NOT included.
