Additional collar for the SD-2500 or SD-1800 dog training collars.
This collar is an additional collar for the SD-2500 or SD-1800 dog training collars. Includes Green collar strap. Dual tipped charger included for charging 2 collars at once. Also works with the Sport DOG SD-1200.
Not compatible with the SD-1825, SD-1225, SD-105, or SD-105s.
Synchronizing a Replacement Collar Receiver to your Transmitter
1. Turn the Collar Receiver off.
2. Press and hold the On/Off Button. The Receiver Indicator Light will come on, then turn off in 4-5 seconds. If the On/Off Button is released too early, the Receiver Indicator Light will begin its normal flashing. If this occurs, start over and repeat from step 1.
3. After the Receiver Indicator Light has turned off, release the On/Off Button.
4. Press and hold the Upper Button on the Remote Transmitter until the Receiver Indicator Light flashes 5 times. You may need to hold both units 2-3 feet from each other. If the Receiver Indicator Light does not flash 5 times, start over and repeat from step 1.
How to Program the Collar Receiver for Two-Dog Operation on the SD-1800 and SD-2000
1. Program the Remote Transmitter to Mode 1-6.
(Consult the Owners Manual for more information on Transmitter Modes.)
A. Set the Intensity Dial to the selected mode.
B. Turn the Remote Transmitter over.
C. With a pen or paperclip, depress and release the mode button.
D. When the mode button is pressed, the Transmitter Indicator Light will be solid in color. When it is released, it will flash the same number of times as the mode selected.
2. Flip the toggle switch to the up position to program the first Collar Receiver.
A. Turn the Collar Receiver off.
B. Press and hold the On/Off Button. The Receiver Indicator Light will come on, then turn off in 4-5 seconds. If the On/Off Button is released too early, the Receiver Indicator Light will begin its normal flashing. If this occurs, start over and repeat from A.
C. After the Receiver Indicator Light has turned off, release the On/Off Button.
D. Press and hold the Upper Button on the Remote Transmitter until the Receiver Indicator Light flashes 5 times. Note: In mode 6, press and release the Upper Button repetitively until the Receiver Indicator Light flashes 5 times. You
may need to hold both units 2-3 feet from each other. If the Receiver Indicator Light does not flash 5 times, start over
and repeat from A.
3. Program the second Collar Receiver the same way using A. Through D. above, but with the toggle switch in the down position.
How to Program the Collar Receiver for Three-Dog Operation on the SD-1800
1. Program the Remote Transmitter to Mode 7.
(Consult the Owners Manual for more information on Transmitter Modes.)
A. Set the Intensity Dial to Level 7.
B. Turn the Remote Transmitter over.
C. With a pen or paperclip, depress and release the mode button.
D. When the mode button is pressed, the Transmitter Indicator Light will be solid in color. When it is released, it will flash the same number of times as the mode selected.
2. Flip the toggle switch to the up position to program the first Collar Receiver.
A. Turn the Collar Receiver off.
B. Press and hold the On/Off Button. The Receiver Indicator Light will come on, then turn off in 4-5 seconds. If the On/Off Button is released too early, the Receiver Indicator Light will begin its normal flashing. If this occurs, start over and repeat from A.
C. After the Receiver Indicator Light has turned off, release the On/Off Button.
D. Press and hold the Upper Button on the Remote Transmitter until the Receiver Indicator Light flashes 5 times. You
may need to hold both units 2-3 feet from each other. If the Receiver Indicator Light does not flash 5 times, start over
and repeat from A.
3. Program the second Collar Receiver the same way using A. Through D. above, but using the Lower Button instead of the Upper Button.
4. Program the third Collar Receiver the same way using A. Through D. above, but using the Side Button instead of the Upper Button.
How to Program the Collar Receiver for Two-Dog Operation on the SD-2500
1. Program the Remote Transmitter to Mode 2, 3, 4, 6, or 8.
(Consult the Owners Manual for more information on Transmitter Modes.)
A. Set the Intensity Dial to the selected mode.
B. Turn the Remote Transmitter over.
C. With a pen or paperclip, depress and release the mode button.
D. When the mode button is pressed, the Transmitter Indicator Light will be solid in color. When it is released, it will flash the same number of times as the mode selected.
2. Flip the toggle switch to the up position to program the first Collar Receiver.
A. Turn the Collar Receiver off.
B. Press and hold the On/Off Button. The Receiver Indicator Light will come on, then turn off in 4-5 seconds. If the On/Off Button is released too early, the Receiver Indicator Light will begin its normal flashing. If this occurs, start over and repeat from A.
C. After the Receiver Indicator Light has turned off, release the On/Off Button.
D. Press and hold the Orange Button on the Remote Transmitter until the Receiver Indicator Light flashes 5 times. Note: In mode 6, press and release the Orange Button repetitively until the Receiver Indicator Light flashes 5 times. You
may need to hold both units 2-3 feet from each other. If the Receiver Indicator Light does not flash 5 times, start over
and repeat from A.
3. Program the second Collar Receiver the same way using A. Through D. above, but with the toggle switch in the down position.
How to Program the Collar Receiver for Three-Dog or Six-Dog Operation on the SD-2500
1. Program the Remote Transmitter to Mode 5 or 7.
(Consult the Owners Manual for more information on Transmitter Modes.)
A. Set the Intensity Dial to the selected mode.
B. Turn the Remote Transmitter over.
C. With a pen or paperclip, depress and release the mode button.
D. When the mode button is pressed, the Transmitter Indicator Light will be solid in color. When it is released, it will flash the same number of times as the mode selected.
2. Flip the toggle switch to the up position to program the first Collar Receiver.
A. Turn the Collar Receiver off.
B. Press and hold the On/Off Button. The Receiver Indicator Light will come on, then turn off in 4-5 seconds. If the On/Off Button is released too early, the Receiver Indicator Light will begin its normal flashing. If this occurs, start over and repeat from A.
C. After the Receiver Indicator Light has turned off, release the On/Off Button.
D. Press and hold the Orange Button on the Remote Transmitter until the Receiver Indicator Light flashes 5 times. You
may need to hold both units 2-3 feet from each other. If the Receiver Indicator Light does not flash 5 times, start over
and repeat from A.
3. Program the second Collar Receiver the same way using A. Through D. above, but using the Middle Button instead of the Orange Button.
4. Program the third Collar Receiver the same way using A. Through D. above, but using the Lower Button instead of the Orange Button.
5. If you want to add a fourth, fifth, or sixth collar, repeat the above steps with the toggle switch in the down position.
FREE!
Owner's Manual Download SportDOG SD-2500 Owner's Manual, downloadable in .pdf format. Click here
to read the SportDOG SD-2500 Owner's Manual.
GUN DOG SUPPLY - "Serving Hunting & Field Dog Owners Nationally Since 1972."
Order online via Secure Server or call 1-800-624-6378 to order! GDS Warehouse, 400 Industrial Park Road, Suite G, Starkville, Mississippi, 39759 USA.
