PetSafe Free to Roam Wireless Instant Pet Fence PIF00-15001
Covers a circular area up to 1/2 acre with no trenches to dig or wires to bury!
The Petsafe Free to Roam Wireless Fence system covers a circular area up to 1/2 acre with no trenches to dig or wires to bury at a fraction of the cost of a traditional physical fence. The portable fence transmitter is perfect for RVs, cabins, and rental houses -- just plug the transmitter into a standard outlet near the area where you want to contain your dog. The transmitter communicates with your dog's waterproof receiver collar and helps keep him in the designated area. The Free to Roam receiver collar is ergonomically designed for comfort and is sized for pets weighing 5 pounds or more. Choose from 5 adjustable levels of static correction to find just the right level for your dog, plus tone only mode which warns your dog with a beep. With just a few short training sessions, you'll create a secure boundary that will keep your dog safe and set your mind at ease.
What's New -- Improvements over the original PetSafe Wireless Fence:
Receiver collar is 20% smaller
Receiver collar has new ergonomic design for better fit
Receiver collar has an on/off button
Includes both long and short probes
Adds transmitter power loss alarm feature
Pass-through receiver allows use with any non-metallic 3/4" strap
Use with dogs weighing as little as 5 pounds
Removable transmitter mounting bracket
The PetSafe Free to Roam Wireless Pet Fence lets you adjust the size of the circular containment boundary for your dog up to 1/2 acre. The waterproof receiver collar is safe for dogs weighing 5 pounds and up and fits neck sizes from 6" - 28". Choose between tone-only mode and five levels of static correction.
LED indicators let you know when the battery is getting low. Customize your receiver collar by adding any non-metallic 3/4" collar strap to the receiver.
The Free to Roam Wireless Containment System is fully compatible with both the original Petsafe PIF-300 and the Stay + Play Wireless Containment Systems. Current PIF-300 owners can expand their wireless coverage with the Free to Roam transmitter or take advantage of the lightweight, rechargeable receiver collar.
How the Free to Roam Wireless Dog Fence Works:
The Petsafe Free to Roam provides the safest, simplest form of pet containment ever. You plug in the transmitter in an inconspicuous location in your home, and it emits a radio signal around your house. Your dog wears a lightweight receiver collar which listens for the signal. While it's receiving the signal, your dog is free to run and play. When the collar approaches the boundary of the signal area, it gives your dog a warning beep.
If your dog continues, he receives a light static energy pulse which is startling but not harmful. With a little training that is simple and quick, your pet quickly learns his boundaries. Setting the boundaries of your yard takes only a few minutes by adjusting the range on the transmitter, from a radius of just a few feet to up to 90 feet.
Free to Roam Wireless Containment System Features:
Covers an adjustable circular area up to 1/2 acre
Collar receiver fits 6 to 28 inch necks
Completely portable -- no wire to bury
Five adjustable levels of correction
Non-stimulating tone only mode for training
Expected battery life is between 1-2 months
Low battery indicator
Add more dogs with Additional Free to Roam Collars
Sets up in 1-2 hours
Fully compatible with the original PIF-300 Petsafe Wireless Fence and Petsafe Stay + Play
Transmitter with AC adapter
Removable transmitter mounting bracket with wall anchors and screws
Waterproof receiver with adjustable collar
Petsafe RFA-67 6 volt battery
Operating and training guide
50 training flags
Test light tool
Short and long contact points
Contact point wrench
One year manufacturer warranty
Wireless Receiver Collar:
Uses Petsafe RFA-67 6V batteries
Smaller and lighter, with an ergonomic design for comfort
Select from 5 levels of static correction plus tone-only mode for training
Fits dogs 5 pounds or more
Fits neck sizes from 6 to 28 inches
Low battery indicator
Pass-through receiver lets you replace the factory collar strap with any non-metallic 3/4" strap -- use different strap colors for different dogs
Add as many receiver collars to your Free to Roam system as you need
Looks like a small household appliance -- blends in with your home decor
Circular adjustable boundary covers up to 1/2 acre (up to 90 radial feet)
Lightweight and portable
Transmitter dimensions: 7.8" x 8.6" x 10.6"
Power Loss Alarm notifies you if transmitter power has been lost
Overlap multiple transmitters to make a larger containment area
Training is Simple and Easy:
Once you have adjusted the signal to the perimeter you want, mark the boundary by placing small training flags at the edge of the signal area.
Using a leash and holding the collar, walk your dog around the boundary, pointing and shaking the flags, saying "NO" and letting your dog hear the beeping of the collar.
With your dog wearing the collar, walk the boundary again and let your dog venture into the signal area on his own and receive a correction. Quickly pull him back into your yard and praise and play with him, again pointing to the flags and saying "NO".
Repeat this process each day for a few weeks and your dog will quickly learn his new boundaries.
After thirty days, you can gradually remove the flags.
Free to Roam is Portable:
The Free to Roam is lightweight with no wires to bury
Great for containing your dog at home and everywhere else
Use anywhere you have an electrical outlet and more than 20 feet of land to cover
Once you reach your destination, program your system and reinforce your dog's boundaries by setting up boundary flags
Petsafe Wireless Fence Comparison Chart:
1. Will the PetSafe Free to Roam Wireless Fence cover a larger circle than 180 feet across?
You can use another wireless transmitter with overlapping boundaries of at least 5-10 feet to increase the size of the pet area.
2. Can I use more than one Receiver Collar with the Free to Roam Wireless Fence?
Yes. There is no limit to the number of pets you can contain with the Free to Roam Wireless Fence. You must purchase an additional Wireless Pet Fence Receiver Collar for each pet.
3. Can I place the receiver on another collar?
Yes. You may use any 3/4 inch, non-metallic collar.
4. Do I need to perform maintenance on my Free to Roam Wireless Fence?
- Check your pet's neck daily for irritation from the contact points.
- Check the contact points on the receiver collar weekly to make sure they are clean.
- Use the contact point wrench to make sure the contact points are secure. Do not over tighten.
- Check the fit of the receiver collar weekly.
- The receiver indicator light acts as a battery status indicator, flashing red every 4 to 5 seconds when battery replacement is required.
Containment System Installation Guide and FAQ
Owner's Manual Download|
Free to Roam Owner's Manual, downloadable in .pdf format.
to read the Free to Roam Owner's Manual.
Country of Origin: Made in China.