Read more about the SportDOG SD-1850 Add-a-Dog Additional Collar / Extra Receiver SDR-BEEP
The SDR-Beep does not depend on a training collar to operate. You can use your transmitter to operate the remote beeper by itself, the training collar by itself, or both together if you need them. If you own a SportDOG UplandHunter 1850, the 1850 transmitter will operate all SDR-BEEP training collar and beeper functions remotely and allow you to run a second dog. If you own a SportDOG SD-1800, SD-2000, SD-2500, or SD-3200 system, your transmitter will operate the SDR-Beep training collar and the remote locate or "call" function on the beeper.
Features:
Original Collar Receiver/Remote Beeper for the UplandHunter SD-1850
Both the Collar Receiver and Remote Beeper are compatible with SportDOG SD-1800, SD-1850, SD-2000, SD-2500 and SD-3200 Remote Transmitters
Modular design allows use of Collar Receiver and Remote Beeper together or separately
This unit can be used with any SportDOG FieldTrainer, SportHunter 1800, WetlandHunter, or ProHunter transmitter.
Not compatible with the SD-1825, SD-105, or SD-105s.
How to Program the Collar Receiver for Two-Dog Operation
1. Flip the toggle switch up to the orange position to program the first Collar Receiver.
A. Turn the Collar Receiver off.
B. Press and hold the On/Off Button. The Receiver Indicator Light will come on, then turn off in 4-5 seconds. If the On/Off Button is released too early, the Receiver Indicator Light will begin its normal flashing. If this occurs, start over and repeat from A.
C. After the Receiver Indicator Light has turned off, release the On/Off Button.
D. Press and hold the Upper Button on the Remote Transmitter until the Receiver Indicator Light flashes 5 times. Note: In mode 6, press and release the Upper Button repetitively until the Receiver Indicator Light flashes 5 times. You may need to hold both units 2-3 feet from each other. If the Receiver Indicator Light does not flash 5 times, start over and repeat from A.
2. Program the second Collar Receiver the same way using A. through D. above, but with the toggle switch down to the black position.
How to Program the Remote Beeper for Two-Dog Operation
1. Flip the toggle switch on the Remote Transmitter to the up position.
2. Program the fi rst Remote Beeper as follows:
A. Turn the Remote Beeper off.
B. Press and hold the On/Off Button. The Remote Beeper's Indicator Light will come on, then turn off in 4-5 seconds. If the On/Off Button is released too early, the Remote Beeper Indicator Light will begin flashing. If this occurs, start over.
C. After the Remote Beeper Indicator Light has turned off, release the On/Off Button.
D. Press and hold the Locate Button on the Remote Transmitter until the Remote Beeper's Indicator Light flashes five times. (You may need to hold the units a few feet apart while doing this.) If the Remote Beeper Indicator Light does not flash 5 times, start over.
3. Program the second Remote Beeper the same way using A. through D. from step 2 but with the toggle switch in the down position.
Buy SportDOG SD-1850 Add-a-Dog Additional Collar / Extra Receiver SDR-BEEP
Help me choose:
