Read more about the SportDOG SD-3200 HoundHunter Add-a-Dog Additional Collar / Extra Receiver SDR-H
Expand your SD-3200 Hound Hunter to up to a 4 dog system.
Includes 1 Red and 1 Yellow collar strap
High Power
Waterproof
Lifetime Limited Warrenty
Original collar receiver for the HoundHunter 3200. This unit can be used with any SportDOG HoundHunter, FieldTrainer, SportHunter, WetlandHunter, and ProHunter transmitters.
Not compatible with the SD-1825, SD-105, or SD-105s.
How to Program the Collar Receiver for Two-Dog Operation (Mode 2):
1. Program the Remote Transmitter to Mode 2.
2. Flip the toggle switch to the left position to program the first Collar Receiver.
A. Turn the Collar Receiver off.
B. Press and hold the On/Off Button. The Receiver Indicator Light will come on, then turn off in 4-5 seconds. If the On/Off Button is released too early, the Receiver Indicator Light will begin its normal flashing. If this occurs, start over and repeat from A.
C. After the Receiver Indicator Light has turned off, release the On/Off Button.
D. Press and hold the Upper Button on the Remote Transmitter until the Receiver Indicator Light flashes 5 times. You may need to hold both units 2-3 feet from each other. If the Receiver Indicator Light does not fl ash 5 times, start over
and repeat from A.
3. Program the second Collar Receiver the same way using A. through D. above, but with the toggle switch set to the right position.
How to Program the Collar Receiver for Up to Four-Dog Operation (Mode 1)
1. Program the Remote Transmitter to Mode 1.
2. Flip the toggle switch to the left position.
3. Program the first Collar Receiver:
A. Turn the Collar Receiver off.
B. Press and hold the On/Off Button. The Receiver Indicator Light will come on, then turn off in 4-5 seconds. If the On/Off Button is released too early, the Receiver Indicator Light will begin its normal flashing. If this occurs, start over and repeat from A.
C. After the Receiver Indicator Light has turned off, release the On/Off Button.
D. Press and hold the Upper Button on the Remote Transmitter until the Receiver Indicator Light flashes 5 times. You may need to hold both units 2-3 feet from each other. If the Receiver Indicator Light does not flash 5 times, start over and repeat from A.
4. Program the second Collar Receiver using A. through D. above, but using the Lower Button in place of the Upper Button.
5. Flip to the toggle switch to the right position.
6. Program the third and fourth Collar Receivers using A. through D. above, for both the Upper (Dog 3) and Lower (Dog 4) buttons.
Help me choose:
