Includes black collar strap. Dual tipped charger included for charging 2 collars at once. Fits up to a 23" Neck!
Not compatible with the SD-1825, SD-1225, SD-105, or SD-105s.
Synchronizing a Replacement Collar Receiver to your Transmitter
1. Turn the Collar Receiver off.
2. Press and hold the On/Off Button. The Receiver Indicator Light will come on, then turn off in 4-5 seconds. If the On/Off Button is released too early, the Receiver Indicator Light will begin its normal flashing. If this occurs, start over and repeat from step 1.
3. After the Receiver Indicator Light has turned off, release the On/Off Button.
4. Press and hold the Upper Button on the Remote Transmitter until the Receiver Indicator Light flashes 5 times. You may need to hold both units 2-3 feet from each other. If the Receiver Indicator Light does not flash 5 times, start over and repeat from step 1.
How to Program the Collar Receiver for Two or Three-Dog Operation on the SD-400/400S and SD-800
1. Program the Remote Transmitter to Mode 4.
(Consult the Owners Manual for more information on Transmitter Modes.)
A. Set the Intensity Dial to Level 4.
B. Turn the Remote Transmitter over.
C. With a pen or paperclip, depress and release the mode button.
D. When the mode button is pressed, the Transmitter Indicator Light will be solid in color. When it is released, it will flash the same number of times as the mode selected.
2. Program the first Collar Receiver.
A. Turn the Collar Receiver off.
B. Press and hold the On/Off Button. The Receiver Indicator Light will come on, then turn off in 4-5 seconds. If the On/Off Button is released too early, the Receiver Indicator Light will begin its normal flashing. If this occurs, start over and repeat from A.
C. After the Receiver Indicator Light has turned off, release the On/Off Button.
D. Press and hold the Upper Button on the Remote Transmitter until the Receiver Indicator Light flashes 5 times. You may need to hold both units 2-3 feet from each other. If the Receiver Indicator Light does not flash 5 times, start over and repeat from A.
3. Program the second Collar Receiver using A through D above, but using the Lower Button in place of the Upper Button.
4. Program the third Collar Receiver using A through D above, but using the Side Button in place of the Lower Button.
Sometimes also referred to as: sportdog add a collar sd 400, sdr fs add a dog® receiver, sportdog sd 400s add a collar, sportdog sdr fs add a dog collar for the sd 400 and sd 800, sdr fs add a dog, sportdog sd 800 add a dog, ..........,
GUN DOG SUPPLY - "Serving Hunting & Field Dog Owners Nationally Since 1972."
Order online via Secure Server or call 1-800-624-6378 to order! GDS Warehouse, 400 Industrial Park Road, Suite G, Starkville, Mississippi, 39759 USA.
