Read more about the Tri-tronics G3 EXP Additional Collar / Extra Receiver with Green Hi-Flex Strap
For use with any G3 or G2 EXP Tri-Tronics system to expand your one dog system into a multidog unit. The EXP collar can also be used as a replacement collar for any G2, G2 EXP or G3 collar receiver.
The EXP receiver comes with a set of short contact points, a set of long contact points, a contact point wrench and instructions for matching it up to your transmitter.
How to Match Additional Tri-Tronics EXP Collars to Your System
Please read all steps before starting.
1. Install strap of the desired color on the new collar and charge new receiver for two hours.
2. Set transmitter dog selection switch to the color of the strap.
3. Set transmitter intensity dial to a number, not a letter.
4. Turn the collar on.
5. Press and hold collar on/off button, then press and hold a "continuous" transmitter button. Hold both buttons down for about 5 seconds - until you hear two quick beeps (ignore the long beep that sounds right away). Release both buttons.
6. The collar will now be set to match your transmitter, and will be turned off.
7. Check for a successful match by turning the collar back on and pressing a "continuous" transmitter button. The collar light will turn on. If you are not planning to use the unit now, turn the collar off after testing.
If the transmitter does not operate the new collar, try the procedure again. If you are still having trouble, you can call Tri-Tronics Customer Service Department at 1-800-456-4343 for help.
Note for Classic 70 G2 EXP or Trashbreaker G2 EXP: When adding a receiver for dogs 1 - 3, use the button that matches the strap color and place the dog selection switch in the UP position. When
adding a receiver for dogs 4 - 6, use the button inside the colored circle that matches the strap color and place the dog selection switch in the DOWN position.
Buy Tri-tronics G3 EXP Additional Collar / Extra Receiver with Green Hi-Flex Strap
Help me choose:
