12-pack Additional Brass Stamped ID Name Plates with Rivets

Need several matching tags? Order by the dozen and save!
All 12 ID plates will have the same information.

These are for our retail customers ONLY. No dealers. Not for resale. Thanks! All 12 ID plates will have the same information. Each tag includes rivets for attachment to a collar. Enter your contact information in the blank form above. We recommend that you list multiple phone numbers along with your name, city, state, and address if you have room. Our tags will fit up to 4 lines of information. The top and bottom lines are longer and will fit 20 letters. Lines 2 and 3 are shorter - fitting only 18. This is because of the placement of the rivets. Our ID Plate machine can stamp the following characters:
  • Letters A - Z (Caps Only)
  • Numbers 0 - 9
  • Special Characters / - . , ' & @ $ # ( ) : ! " _ * + =
    • Be sure to read my article on Important Dog I.D. Tag Information.

    Instructions for attaching name plates using rivets:

    Most of our collars are pre-punched for ID plates. If your collar is not, or you are adding a second ID plate:
    1. Use the ID plate to mark where it will be attached to the collar
    2. For leather collars, use a leather punch tool, ice pick, or hammer and nail to make the holes for the rivets
    3. For nylon collars, the holes should be melted using a soldering iron or a heated nail or ice pick
    Once you have your holes punched:
    1. Line the plate up on top of the holes and put the stud part of the rivet through from the bottom
    2. Put the crown over the stud and hammer it closed on a hard surface (concrete or steel)
    3. You should drive the 2 pieces together until the upper surface flattens out
    4. Your I.D. tag is now attached!


    Price: 24.99
    Code: 12-tags


    We ship these US48 only. We'll contact you with additional shipping / sales taxes or questions about your order.
    Questions? We're here to help. Call 1-800-624-6378 or 662-324-2410 and we'll answer any questions or take a phone order.


    I am always amazed at what some folks want on their dog's ID tags. We get some really interesting ones with information that really has no place on a dog tag. We will put anything you want on your ID plates, but keep in mind that the main purpose of an ID plate is to get your dog home safely if he gets lost. In our opinion, anything else has no place on a tag. Be sure to read my article on what information you need to put on your dog's nameplate.





    NEXT: 12-pack Additional Stainless Steel Engraved ID Name Plates with Rivets
    UP: Dog ID Plates & Name Tags
    PREVIOUS: STAINLESS STEEL Laser Engraved Dog Collar Name Plate with Rivets
    link to original id

    Gun Dog Supply home page

    Questions? Since 1972, we're here to help. Call 1-800-624-6378 or 662-324-2410 and we'll answer any questions or take a phone order. Prefer email? Contact sales@gundogsupply.com. -- Steve Snell