Medium 40 in. x 22 in. Rectangle Premium Weave Dog Cot by 4Legs4Pets

Price: 63.99

Code: 8396

Questions? We're here to help. Call 1-800-624-6378 or 662-324-2410 and we'll answer any questions or take a phone order.

Some assembly required. 40" x 22" rectangle, 5" height Ideal size for large breed dogs weighing 130 lbs. or less Use for teaching your dog the PLACE command Made from premium open mesh material Lace-up style cover Powder-coated steel square-end frame Resists mold, mildew, fleas, and other pests Elevated bed design makes it clear to your dog exactly where he should be Leg holes allow inter-stacking of multiple cots for more efficient storage Non-skid leg grippers provide extra stability Add a set of 4 plugs to cover the stacking holes in the top of the cot legs. Cleaning Instructions: To disinfect, use one part chlorine bleach to two parts water Can be rinsed off outside or in shower, but DO NOT submerge in water Assembly Instructions: Place cover upside down on flat surface (preferably on a table or floor). Slide one long side bar through each long sewn "tunnel." (If assembling a square cot, all rails will be the same size). Slide one short end bar through the short sewn "tunnel." Insert square ends of the short end bar into plastic legs opening. You will hear a click, indicating that it is inserted completely. Insert square ends of the long side bar into plastic legs opening. You will hear a click, indicating that it is inserted completely. IMPORTANT: Pull the cover towards the open end, taking up the excess slack. Insert square ends of remaining short end bar into remaining plastic legs opening. You will hear a click, indicating that it is inserted completely. Lay short end bar with inserted plastic legs on top of the flap of the cover and insert one of the plastic leg opening into the square long side bar only 1/4". Now insert the other plastic leg opening into the other square long side bar only 1/4". (Insert both ends only 1/4", otherwise the cot won't assemble properly). Stand cot upright with flap of cover on flat surface and with both hands grab top of cot in both corners and pull down. This will ensure the rails are in the legs completely. Lay cot flat and place the cover flap over the short end bar then lace the cord through the closest eyelet on flap, then across to the eyelet on the strip, back through the eyelet on the flap, etc., pulling tightly as you are lacing it. (If you don't pull the lace tight as you are lacing, the lace may not be long enough to complete the assembly). Tie off in a knot. If you have purchased the optional cot leg tips and/or cot leg plugs, please see opposite side for instructions on how to put them on your cot.

NEXT: Large 40 in. x 30 in. Rectangle Premium Weave Dog Cot by 4Legs4Pets

UP: 4Legs4Pets Premium Weave Dog Cots

PREVIOUS: Small 30 in. x 22 in. Rectangle Premium Weave Dog Cot by 4Legs4Pets

link to original id

Questions? Since 1972, we're here to help. Call 1-800-624-6378 or 662-324-2410 and we'll answer any questions or take a phone order. Prefer email? Contact sales@gundogsupply.com. -- Steve Snell