Dogtra ARC Additional Collar

Price: 164.99

Code: 6612

Questions? We're here to help. Call 1-800-624-6378 or 662-324-2410 and we'll answer any questions or take a phone order.

Compatible with the Dogtra ARC System . Dogtra ARC Additional Collar Features: Nick (Momentary) and Continuous stimulation along with a non-stimulating pager/vibration Use to expand your system up to 2 dogs Fully waterproof receiver collar Low to medium power stimulation For dogs as small as 15 lbs. 3/4 mile range Rechargeable 2-hour rapid charge Lithium Polymer batteries Limited lifetime warranty Dogtra ARC Additional Collar Comes With: Receiver attached to a user replaceable 1" orange collar strap (fits up to 26" neck) Splitter cable How to Match Collars to Your ARC System Instructions for 2-dog systems are below. Please read all steps before starting. 1st Dog Code Setting: 1. Turn the transmitter on by pushing the ON/OFF Button located on the right side. 2. Set the Intensity Selection Dial to "0". 3. Starting with the receiver/collar turned OFF, place the two red dots together for 5 seconds. The LED on the receiver/collar will rapidly blink green when successfully in code setting mode. Once in code setting mode, separate the receiver/collar and the handheld transmitter. 4. While the LED on the receiver/collar is rapidly blinking, press the two gray buttons together on the handheld transmitter. The code setting is complete when the LED on the receiver/collar blinks every 5 seconds. The gray buttons will now control the receiver/collar. 2nd Dog Code Setting: 1. Turn the transmitter on by pushing the ON/OFF Button located on the right side. 2. Set the Intensity Selection Dial to "0". 3. Starting with the receiver/collar turned OFF, place the two red dots together for 5 seconds. The LED on the receiver/collar will rapidly blink green when successfully in code setting mode. Once in code setting mode, separate the receiver/collar and the handheld transmitter. 4. While the LED on the receiver/collar is rapidly blinking, press the two orange buttons together on the handheld transmitter. The code setting is complete when the LED on the receiver/collar blinks every 5 seconds. The orange buttons will now control the second receiver/collar and the gray buttons will control the first receiver/collar. Pressing a button on the handheld transmitter will activate the LED on the corresponding receiver/collar.

NEXT: Dogtra ARC Handsfree PLUS Additional Collar

UP: Dogtra Additional Collars / Extra Receivers

PREVIOUS: Dogtra JUST RIGHT Additional / Replacement Receiver Collar

link to original id

Questions? Since 1972, we're here to help. Call 1-800-624-6378 or 662-324-2410 and we'll answer any questions or take a phone order. Prefer email? Contact sales@gundogsupply.com. -- Steve Snell