Dogtra ARC Handsfree PLUS Additional Collar

Price: 174.99

Code: 9459

Questions? We're here to help. Call 1-800-624-6378 or 662-324-2410 and we'll answer any questions or take a phone order.

Compatible with the Dogtra ARC Plus System . Dogtra ARC Handsfree PLUS Additional Collar Features: Use to expand your system up to 2 dogs Slim design ergonomically shaped to your dog's neck Fully waterproof receiver collar 127 levels of stimulation Low to medium power stimulation For dogs as small as 15 lbs. 3/4 mile range Rechargeable 2-hour rapid charge Lithium Polymer batteries Limited lifetime warranty Dogtra ARC Plus Additional Collar Comes With: Receiver attached to a user replaceable 1" orange collar strap (fits up to 26" neck) Splitter cable Remote handsfree Square How to Match Collars to Your ARC Plus System Instructions for 2-dog systems are below. Please read all steps before starting. 1st Dog Code Setting: 1. Turn the transmitter on by pushing the ON/OFF Button located on the right side. 2. Set the Intensity Selection Dial to "0". 3. Starting with the receiver/collar turned OFF, place the two red dots together for 5 seconds. The LED on the receiver/collar will rapidly blink green when successfully in code setting mode. Once in code setting mode, separate the receiver/collar and the handheld transmitter. 4. While the LED on the receiver/collar is rapidly blinking, press the two gray buttons together on the handheld transmitter. The code setting is complete when the LED on the receiver/collar blinks every 5 seconds. The gray buttons will now control the receiver/collar. 2nd Dog Code Setting: 1. Turn the transmitter on by pushing the ON/OFF Button located on the right side. 2. Set the Intensity Selection Dial to "0". 3. Starting with the receiver/collar turned OFF, place the two red dots together for 5 seconds. The LED on the receiver/collar will rapidly blink green when successfully in code setting mode. Once in code setting mode, separate the receiver/collar and the handheld transmitter. 4. While the LED on the receiver/collar is rapidly blinking, press the two Bottom buttons together on the handheld transmitter. The code setting is complete when the LED on the receiver/collar blinks every 5 seconds. The brown buttons will now control the second receiver/collar and the gray buttons will control the first receiver/collar. Pressing a button on the handheld transmitter will activate the LED on the corresponding receiver/collar.

NEXT: Dogtra 280X / 200iQ Additional Collar

UP: Dogtra Additional Collars / Extra Receivers

PREVIOUS: Dogtra ARC Additional Collar

link to original id

Questions? Since 1972, we're here to help. Call 1-800-624-6378 or 662-324-2410 and we'll answer any questions or take a phone order. Prefer email? Contact sales@gundogsupply.com. -- Steve Snell