CLOSEOUT: Dogtra IQ Cliq Additional Collar

Expand your iQ CliQ into a two dog system

See how to match collars to your Dogtra iQ CliQ system

How to Match Collars to Your Dogtra iQ CliQ System

1. To turn the iQ CLiQ into a 2-dog system, start with the handheld transmitter with the stimulation set to level 0. Hold down buttons 1 and 2 simultaneously for 5 seconds. You should now see that the LED indicator is blinking rapidly.
2. With the receiver/collar turned off, take the handheld transmitter and hold the two red on/off dots together for 5 seconds. The LED indicator should now be blinking rapidly.
3. While both the handheld transmitter and receiver/collar LED indicators are rapidly blinking, press button 2 to code that button to the receiver/collar you desire. The LED indicators on both the handheld transmitter and receiver/collar will blink rapidly for 15 seconds or until they have been coded together.
4. When the iQ CLiQ has been coded with an additional receiver/collar, button 1 will function as the Nick and Pulsating Nick stimulation on the first receiver/collar. Button 2 will function as the Nick and Pulsating Nick stimulation on the newly coded second receiver/collar.
5. To go back to a 1-dog system, repeat steps 1 and 2. While both the handheld transmitter and receiver/collar LED indicators are rapidly blinking, press button 1 on the handheld transmitter.
6. When done correctly, both buttons 1 and 2 will now only operate the one receiver/collar you have coded. To check that the handheld transmitter is coded to the receiver/collar, press a button on the handheld transmitter, and the corresponding receiver/collar LED indicator will blink.

Contents Field