How to Match Replacement Collars to Your Dogtra 2-dog or Expandable System
Please read all steps before starting.
1. Turn the transmitter on by pushing the ON/OFF Button located on the right side (not all transmitters have an On/Off button).
2. Set the Intensity Selection Dial to "0".
3. Set the Toggle in the UP position to synch the BLACK (Dog 1) collar (GREEN on T&B systems), or DOWN to synch the ORANGE (Dog 2) collar.
4. Place the red dot on the back of the transmitter to the red dot on the collar/receiver. Hold the two red dots together for about 5 seconds or more. Release them when the green LED blinks rapidly on the collar/receiver.
5. Within 5 seconds after taking the two red dots apart, hold down the Orange and Black (Nick and Constant) buttons simultaneously on the side of the transmitter for 3 seconds or until the rapid green blink resumes to a slower paced green blink. The LED indicator light will start to blink once every 4 seconds after staying lit green for about a second. Now the coding is completed.
NEXT: How to Match Additional / Replacement Dogtra Collars to Your EDGE System
UP: How to Pair Dogtra Collars to Your System
PREVIOUS: How to Match Replacement Collars to Your Dogtra 1-dog Non-Expandable System
link to original idQuestions? Since 1972, we're here to help. Call 1-800-624-6378 or 662-324-2410 and we'll answer any questions or take a phone order. Prefer email? Contact sales@gundogsupply.com. -- Steve Snell