Price: 124.99
Code: 7101
Questions? We're here to help. Call 1-800-624-6378 or 662-324-2410 and we'll answer any questions or take a phone order.
Compatible with the DT Systems MR 1100 Camo and MR 1100 .
DT Systems MR 1100 Additional Collar Features:
Fully waterproof
Mossy Oak Shadow Grass Blades camo pattern
Rugged molded case built to withstand all kinds of training and hunting conditions
"Maxx Range 360" internal antenna
Rechargeable NiMH battery
Magnetic on/off switch
SmartLED indicator light shows charging status and battery life status
Manufacturer limited lifetime warranty
DT Systems MR 1100 Additional Collar Comes With:
Collar receiver with 3/4" strap
Splitter cable
Programming your MR 1100 to match your transmitter:
1. Select the desired Collar Selecting Switch position on the transmitter.
2. Hold the Transmitter Magnet Indicator (white dot) directly against the Magnetic Activation Switch (small bump) on the right side of the Collar Receiver.
3. The SmartLED light inside the Collar Receiver will light up solid for about 1 second, followed by 6 flashes. You must keep the Transmitter next to the Collar Receiver during this time.
4. Continue to hold the Transmitter against the Collar Receiver until the SmartLED light stays on solid. The Collar Receiver is now in the Code Running Mode (the SmartLED light will stay lit for approximately 8 seconds while it is in this mode).
5. Remove the Transmitter from the Collar Receiver and press the 'N' and 'C' buttons simultaneously while it is in the Code Running Mode.
6. When the SmartLED blinks 2 times and beeps 3 times, the Collar ID is programmed and the Collar Receiver will turn off. Turn the unit back on to verify programming was successful.
NOTE: -- Do not move the Transmitter Magnet ON/OFF switch from the Collar Receiver Magnetic Activation Switch until after the SmartLED stops flashing and stays on solid or the Collar Receiver will not go into the Code Running Mode. You must press the 'N' and 'C' buttons simultaneously while the SmartLED is lit solid.
Questions? Since 1972, we're here to help. Call 1-800-624-6378 or 662-324-2410 and we'll answer any questions or take a phone order. Prefer email? Contact sales@gundogsupply.com. -- Steve Snell