Garmin T20 Add-On GPS TRACKING ONLY Collar

Price: 299.99

Code: T20

Questions? We're here to help. Call 1-800-624-6378 or 662-324-2410 and we'll answer any questions or take a phone order.

Need even MORE run time? Get an EXTENDED LIFE BATTERY. Have small dogs and want a smaller collar? Add Garmin's ZERO LENGTH ANTENNA KEEPER. Garmin T20 Features: Dynamic Tracking auto-adjusts the collar update rate based on your dog's activity (less movement=lower update rate) to extend the battery life to approx. 68 hours on a single charge Multi-colored remotely activated LED light beacons let you easily ID your dogs in low light conditions with 7 color options: white, yellow, magenta, cyan, green, red, and blue User-replaceable flex band reduces downtime if your collar gets damaged Multi-colored collar status indicator Blue: pairing mode Yellow: acquiring GPS signal Green: GPS signal established Red: low battery WiFi connectivity allows collar software to auto-update while charging "One-size-fits-most" collar design can be comfortably worn by both small and large dogs Remotely activated Sleep Mode further extends battery life (only with Alpha handhelds) Waterproof (1 ATM -- 10 meters) Top-mounted, high-sensitivity GPS / Galileo receiver gives better signal reception than GPS alone VIRB control on the collar lets you start or stop VIRB video recording with the Alpha handheld (VIRB camera not included) User-replaceable 1" collar strap fits neck sizes between 11.5" and 22" 22 1/2" long-range braided steel collar antenna takes all the abuse a hunting dog can give it USB-C port on collar for manual software updates via Garmin Express and exporting additional GPS dog data Garmin T20 Collar Specifications: Dimensions: 1.4" H x 3.2" W x 1.8" D Weight: 8.8 oz. with collar strap and antenna Garmin T20 Collar Compatibility: ALPHA 300i / 300 / 200i / 200 / 100 / 10 (tracking function only) PRO 550 PLUS (tracking function only, limited to 2.5-second update rate, default beacon light color) ASTRO 430 NOT compatible with Astro 320 or 220 handhelds Garmin T20 Standard Battery Life (included): Up to 68 hours using dynamic tracking (default) Up to 25 hours with location updates every 2.5 seconds Up to 84 hours with location updates every 2 minutes Garmin T20 Extended Battery Life ( available separately ): Up to 136 hours using dynamic tracking (default) Up to 50 hours with location updates every 2.5 seconds Up to 168 hours with location updates every 2 minutes Garmin T20 Comes With: Steel braided antenna USB-C cable Collar charging clip Owner's manual 1-year Garmin warranty AKC Competition Approved The AKC Performance Events Department has approved the Garmin T20 collar for use in pointing breed field trials and hunting tests. Not available to Canadian addresses . This product is approved for use in the US only. Collar-to-handheld radio communication may be disabled in Europe and other prohibited areas. How to Match Collars to Your Alpha Please read all steps before starting. To pair wirelessly, the dog collar device must be within range of the Alpha handheld. 1. Hold the power button on the dog collar device until the device emits two series of beeps (about 2 seconds), and then release the power button. The status LED flashes blue. The dog collar device is now ready to be paired with a handheld. 2. On the handheld, select Dog List > Add Dog. 3. Select Pair Collar, and follow the on-screen instructions. 4. After successfully adding the dog collar device, enter the name of the dog, and select check mark. 5. Select a beacon color for this dog collar device, and select finish. How to Pair Additional Garmin Collars to Your PRO 550 PLUS Please read all steps before starting. 1. Charge the new receiver for two hours and install the desired color collar strap. 2. Turn on the handheld device. 3. Select a color with the toggle switch. The dog collar device will be assigned to this color. 4. Turn the intensity dial to N. 5. Press the green tone button. 6. Press the top training button. 7. Follow the on-screen instructions to select pair collar. 8. Follow the on-screen instructions to select auto, tree, or point for the type of dog wearing the collar. 9. The handheld device is now ready to pair. You can cancel pairing by pressing the green tone button. 10. If the dog collar device is on, turn it off. 11. Hold the power button on the dog collar device until the device emits two series of beeps (about 2 seconds), and then release the power button. The status LED flashes blue. The dog collar device is now ready to be paired with a handheld. 12. The handheld device will vibrate and a check mark will appear on the screen when the devices have paired successfully. NOTE: GPS signals must be established on both devices before the handheld device displays the dog collar device battery status, distance, and direction.

NEXT: How to Assemble your TT25 MINI Collar

UP: Garmin ALPHA GPS Dog Tracking Collars

PREVIOUS: Garmin TT25 Add-On GPS TRACKING + TRAINING Collar with Remote Beeper

link to original id

Questions? Since 1972, we're here to help. Call 1-800-624-6378 or 662-324-2410 and we'll answer any questions or take a phone order. Prefer email? Contact sales@gundogsupply.com. -- Steve Snell