USED Garmin T20 Add-On GPS TRACKING ONLY Collar

60-day Gun Dog Supply warranty
Hand-tested to meet all original specs
Supplies are limited!

Need a charger? Add one with the dropdown menu! What is a "USED" product?

These used Garmin collars and handhelds come from customer trade-ins of previously owned equipment. Each unit is personally inspected by Steve, who verifies that it meets our standards. We clean up the gear, update the firmware, do a full factory reset, and test everything to make sure it's working like it should. All used collars and handhelds from Gun Dog Supply come with a 60-Day Limited Warranty -- if it stops working due to normal use within 60 days, we'll repair it or replace it.

Personally inspected and tested by Steve

Reset to original factory settings

Updated to the latest firmware

60-day Gun Dog Supply warranty

Garmin T20 Features:

Dynamic Tracking auto-adjusts the collar update rate based on your dog's activity (less movement=lower update rate) to extend the battery life to approx. 68 hours on a single charge
Multi-colored remotely activated LED light beacons let you easily ID your dogs in low light conditions with 7 color options: white, yellow, magenta, cyan, green, red, and blue
User-replaceable flex band reduces downtime if your collar gets damaged
Multi-colored collar status indicator
- Blue: pairing mode
- Yellow: acquiring GPS signal
- Green: GPS signal established
- Red: low battery
WiFi connectivity allows collar software to auto-update while charging
"One-size-fits-most" collar design can be comfortably worn by both small and large dogs
Remotely activated Sleep Mode further extends battery life (only with Alpha handhelds)
Waterproof (1 ATM -- 10 meters)
Top-mounted, high-sensitivity GPS / Galileo receiver gives better signal reception than GPS alone
VIRB control on the collar lets you start or stop VIRB video recording with the Alpha handheld (VIRB camera not included)
User-replaceable 1" collar strap fits neck sizes between 11.5" and 22"
Braided steel collar antenna takes all the abuse a hunting dog can give it
USB-C port on collar for manual software updates via Garmin Express and exporting additional GPS dog data

Garmin T20 Collar Specifications:

Dimensions: 1.4" H x 3.2" W x 1.8" D
Weight: 8.8 oz. with collar strap and antenna

Garmin T20 Standard Battery Life (included):

Up to 68 hours using dynamic tracking (default)
Up to 25 hours with location updates every 2.5 seconds
Up to 84 hours with location updates every 2 minutes

Garmin T20 Extended Battery Life (available separately):

Up to 136 hours using dynamic tracking (default)
Up to 50 hours with location updates every 2.5 seconds
Up to 168 hours with location updates every 2 minutes

AKC Competition Approved The AKC Performance Events Department has approved the Garmin T20 collar for use in pointing breed field trials and hunting tests.

Not available to Canadian addresses. This product is approved for use in the US only. Collar-to-handheld radio communication may be disabled in Europe and other prohibited areas.

How to Match Collars to Your Alpha

Please read all steps before starting. To pair wirelessly, the dog collar device must be within range of the Alpha handheld.
1. Hold the power button on the dog collar device until the device emits two series of beeps (about 2 seconds), and then release the power button. The status LED flashes blue. The dog collar device is now ready to be paired with a handheld.
2. On the handheld, select Dog List > Add Dog.
3. Select Pair Collar, and follow the on-screen instructions.
4. After successfully adding the dog collar device, enter the name of the dog, and select check mark.
5. Select a beacon color for this dog collar device, and select finish.

How to Pair Additional Garmin Collars to Your PRO 550 PLUS

Please read all steps before starting.
1. Charge the new receiver for two hours and install the desired color collar strap.
2. Turn on the handheld device.
3. Select a color with the toggle switch. The dog collar device will be assigned to this color.
4. Turn the intensity dial to N.
5. Press the green tone button.
6. Press the top training button.
7. Follow the on-screen instructions to select pair collar.

8. Follow the on-screen instructions to select auto, tree, or point for the type of dog wearing the collar.
9. The handheld device is now ready to pair. You can cancel pairing by pressing the green tone button.
10. If the dog collar device is on, turn it off.
11. Hold the power button on the dog collar device until the device emits two series of beeps (about 2 seconds), and then release the power button. The status LED flashes blue. The dog collar device is now ready to be paired with a handheld.
12. The handheld device will vibrate and a check mark will appear on the screen when the devices have paired successfully. NOTE: GPS signals must be established on both devices before the handheld device displays the dog collar device battery status, distance, and direction.

Price: 249

Code: T20USD

We ship these US48 only. We'll contact you with additional shipping / sales taxes or questions about your order.

Questions? We're here to help. Call 1-800-624-6378 or 662-324-2410 and we'll answer any questions or take a phone order.

Contents Field

NEXT: USED Garmin TT15X Collar

UP: Garmin USED Handhelds and Collars

PREVIOUS: USED Garmin T5X GPS TRACKING ONLY Collar

link to original id

Gun Dog Supply home page