Garmin TT25 Add-On GPS TRACKING + TRAINING Collar

  • Dynamic Tracking auto-adjusts update rate for longer battery life
  • Multi-colored LED running lights help you ID your dogs in the dark
  • "One-size-fits-most" design fits comfortably on small or large dogs
  • Customize your collar's Battery, Flex Band, and Collar Strap!

    • Customize your TT25 with your choice of:

    Garmin TT25 Features: Garmin TT25 Collar Specifications: Garmin TT25 Collar Compatibility: Garmin TT25 Standard Battery Life (included): Garmin TT25 Extended Battery Life (optional): Garmin TT25 Comes With: Not available to Canadian addresses. This product is approved for use in the US only. Collar-to-handheld radio communication may be disabled in Europe and other prohibited areas.

    How to Pair Additional Garmin Collars to Your Alpha

    Please read all steps before starting. To pair wirelessly, the dog collar device must be within range of the Alpha handheld.

    1. Hold the power button on the dog collar device until the device emits two series of beeps (about 2 seconds), and then release the power button. The status LED flashes blue. The dog collar device is now ready to be paired with a handheld.

    2. On the handheld, select Dog List > Add Dog.

    3. Select Pair Collar, and follow the on-screen instructions.

    4. After successfully adding the dog collar device, enter the name of the dog, and select check mark.

    5. Select a beacon color for this dog collar device, and select finish.

    How to Pair Additional Garmin Collars to Your PRO 550 PLUS

    Please read all steps before starting.

    1. Charge the new receiver for two hours and install the desired color collar strap.

    2. Turn on the handheld device.

    3. Select a color with the toggle switch. The dog collar device will be assigned to this color.

    4. Turn the intensity dial to N.

    5. Press the green tone button.

    6. Press the top training button.

    7. Follow the on-screen instructions to select pair collar.

    8. Follow the on-screen instructions to select auto, tree, or point for the type of dog wearing the collar.

    9. The handheld device is now ready to pair. You can cancel pairing by pressing the green tone button.

    10. If the dog collar device is on, turn it off.

    11. Hold the power button on the dog collar device until the device emits two series of beeps (about 2 seconds), and then release the power button. The status LED flashes blue. The dog collar device is now ready to be paired with a handheld.

    12. The handheld device will vibrate and a check mark will appear on the screen when the devices have paired successfully. NOTE: GPS signals must be established on both devices before the handheld device displays the dog collar device battery status, distance, and direction.


    Price: 349.99
    Code: TT25


    We ship these US48 only. We'll contact you with additional shipping / sales taxes or questions about your order.
    Questions? We're here to help. Call 1-800-624-6378 or 662-324-2410 and we'll answer any questions or take a phone order.


    Contents Field

    Let's talk about what's new in the new Alpha series of collars. We have two new collars: the T20, which is a tracking-only collar, and the TT25, which is both a tracking and training collar. There are several new features in these new collars, the first one being dynamic updates. In previous generations of collars, update rates were set to a standard set time. The new collars have standard set update rates, but they also offer the option of a dynamic update rate. In an effort to conserve battery life, the dynamic update rate will decrease the frequency of updates to the handheld when the dog is motionless. This extends the battery life, giving you up to 68 hours of battery from a single charge. The next new feature is multicolored running lights. On previous models, we've had running lights that you could control from the handheld, which allowed you to turn them on and off if your dogs were running, especially in low light conditions or at night. These new collars now give you seven different color options so you can identify your dogs in the dark by changing their light color. These new Garmin collars allow you to change the flex bands. In the past, the flex band contained a wire going to the GPS antenna. In these new T-series collars, the flex band can be easily switched out in the field by removing just two screws, decreasing downtime. The multicolored status light is a major upgrade on these new T-series collars. The status light flashes in the center of the collar when it's turned on, and the color indicates what your collar is doing:
  • Yellow: searching for GPS signal
  • Green: acquired GPS signal
  • Blue: pairing mode
  • Red: low battery
    • Having the multicolored status light makes it easier to look at your collar and tell when it's ready to use. The TT25 and T20 come in one standard size and are smaller than previous regular collars. (Garmin does not offer MINI and regular sizes of these.) They are sized so they will fit most dogs really well. It's not so small that it's going to be a problem on a large dog, yet it's not so big it's going to cause a problem with smaller beagles. Automatic WiFi updates are a great new feature. You can sync the collars to your home WiFi network using your Alpha 300 handheld, and when you put the collars on the charger, they will go online and check to see if there are any updates. Then, they automatically install the new updates. This will save you a lot of time and keep you from wondering if there's a new update.





    NEXT: Garmin TT25 MINI Add-On GPS TRACKING + TRAINING Collar for Small Dogs
    UP: Garmin ALPHA GPS Dog Tracking Collars
    PREVIOUS: How to Assemble your TT25 EXT Collar
    link to original id

    Gun Dog Supply home page

    Questions? Since 1972, we're here to help. Call 1-800-624-6378 or 662-324-2410 and we'll answer any questions or take a phone order. Prefer email? Contact sales@gundogsupply.com. -- Steve Snell