REFURBISHED Garmin TT25 Add-On GPS TRACKING + TRAINING Collar

Full one-year Gun Dog Supply warranty
New outer case with recertified electronics
Hand-tested to meet all original specs
Supplies are limited!

Need a charger? Add one with the dropdown menu! What is a "REFURB?"

Refurbished products (aka "REFURBS") are units that were returned to Garmin, factory recertified, and thoroughly tested.

Totally brand new outer cases

Refurbished electronics inside, mostly taken from returns

Hand-tested to certify they are up to original spec

Full 1-year Gun Dog Supply warranty Garmin Says -- Garmin Recertified Devices are products that have been returned to Garmin for a variety of reasons. These returned devices go through a recertification process that includes an extensive testing procedure to bring them up to the same specifications as when they were manufactured as new, maintaining our high-quality Garmin standards. A recertified device that is purchased from an authorized Garmin dealer will come with a one-year warranty.

Garmin TT25 Features:

Dynamic Tracking auto-adjusts the collar update rate based on your dog's activity (less movement=lower update rate) to extend the battery life to approx. 68 hours on a single charge
Multi-colored remotely activated LED light beacons let you easily ID your dogs in low light conditions with 7 color options: white, yellow, magenta, cyan, green, red, and blue
User-replaceable flex band reduces downtime if your collar gets damaged
Multi-colored collar status indicator
- Blue: pairing mode
- Yellow: acquiring GPS signal
- Green: GPS signal established
- Red: low battery
WiFi connectivity allows collar software to auto-update while charging
"One-size-fits-most" collar design can be comfortably worn by both small and large dogs
Remotely activated Sleep Mode further extends battery life (only with Alpha handhelds)
Waterproof (1 ATM -- 10 meters)
Top-mounted, high-sensitivity GPS / Galileo receiver gives better signal reception than GPS alone
VIRB control on the collar lets you start or stop VIRB video recording with the Alpha handheld (VIRB camera not included)
18 levels of both continuous and momentary stimulation
Non-stimulating vibration function
Non-stimulating tone function
User-replaceable 1" collar strap fits neck sizes between 11.5" and 22"
Braided steel collar antenna takes all the abuse a hunting dog can give it
USB-C port on collar for manual software updates via Garmin Express and exporting additional GPS dog data

Garmin TT25 Collar Specifications:

Dimensions: 1.4" H x 3.2" W x 1.8" D
Weight: 8.8 oz. with collar strap and antenna

Garmin TT25 Standard Battery Life (included):

Up to 68 hours using dynamic tracking (default)
Up to 25 hours with location updates every 2.5 seconds
Up to 84 hours with location updates every 2 minutes

Garmin TT25 Extended Battery Life (optional):

Up to 136 hours using dynamic tracking (default)
Up to 50 hours with location updates every 2.5 seconds
Up to 168 hours with location updates every 2 minutes

Not available to Canadian addresses. This product is approved for use in the US only. Collar-to-handheld radio communication may be disabled in Europe and other prohibited areas.

How to Pair Additional Garmin Collars to Your Alpha

Please read all steps before starting. To pair wirelessly, the dog collar device must be within range of the Alpha handheld.
1. Hold the power button on the dog collar device until the device emits two series of beeps (about 2 seconds), and then release the power button. The status LED flashes blue. The dog collar device is now ready to be paired with a handheld.
2. On the handheld, select Dog List > Add Dog.
3. Select Pair Collar, and follow the on-screen instructions.
4. After successfully adding the dog collar device, enter the name of the dog, and select check mark.
5. Select a beacon color for this dog collar device, and select finish.

How to Pair Additional Garmin Collars to Your PRO 550 PLUS

Please read all steps before starting.
1. Charge the new receiver for two hours and install the desired color collar strap.
2. Turn on the handheld device.
3. Select a color with the toggle switch. The dog collar device will be assigned to this color.
4. Turn the intensity dial to N.
5. Press the green tone button.
6. Press the top training button.
7. Follow the on-screen instructions to select pair collar.
8. Follow the on-screen instructions to select auto, tree, or point for the type of dog wearing the collar.
9. The handheld device is now ready to pair. You can cancel pairing by pressing the green tone button.
10. If the dog collar device is on, turn it off.
11. Hold the power button on the dog collar device until the device emits two series of beeps (about 2 seconds), and then release the power button. The status LED flashes blue. The dog collar device is now ready to be paired with a handheld.
12. The handheld device will vibrate and a check mark will appear on the screen when the devices have paired successfully. NOTE: GPS signals must be established on both devices before the handheld device displays the dog collar device battery status, distance, and direction.

Price: 299

Code: TT25RFB

We ship these US48 only. We'll contact you with additional shipping / sales taxes or questions about your order.

Questions? We're here to help. Call 1-800-624-6378 or 662-324-2410 and we'll answer any questions or take a phone order.

Contents Field

NEXT: REFURBISHED Garmin T5X Collar

UP: Garmin REFURBISHED Handhelds and Collars

PREVIOUS: REFURBISHED Garmin PRO Trashbreaker Additional Collar TB10

link to original id

Gun Dog Supply home page