MOmarsh Tree and Boat Ramp Stand

Price: 199.99

Code: 7109

Questions? We're here to help. Call 1-800-624-6378 or 662-324-2410 and we'll answer any questions or take a phone order.

Lightweight, foldable and fully adjustable Functions as a dog boat ladder or timber stand Water-draining Dura Mesh floor Gunnel clamps and adjustable sidewall positioning system fit a wide range of boats in multiple locations The gunnel clamps can be relocated for use as gear hooks in the timber The two-stage step system makes it easier for your dog to reach the platform in deeper water Supports up to 100 lbs. Weight: 15 lbs. Platform measurements: 15 3/4"W x 16 3/4"L Distance from first to second step: approx. 18 1/2" Adjustable for boat sidewall height 17" - 21" For use on trees: Unfold stand. Remove boat gunnel clamps or turn in a direction that does not interfere with tree clearance. These can be removed and or turned by removing the D-ring pins. If flipped and reconnected upside down they can function as gear hooks as well. Replace pins. Use the supplied ratchet strap to secure the stand to the tree by connecting the strap's hooks to the welded eye loops located on the uprights of the stand. Attach so the top platform is slightly above the water surface (bottom platform will extend below the surface). For smaller trees allow the tree grabbing teeth to engage and support the bottom of the stand at the desired angle. For larger trees, the telescoping stops can be adjusted to achieve the desired angle. For use on boats: Unfold stand. Adjust gunnel clamps to the boat position (adjusting knobs to the back when looking at the stand). This is achieved by removing the D-ring pins and turning the clamps to the appropriate direction. Replace pins. Hook the stand to the boat's gunnel. Use the adjusting knobs to secure the stand in place. Using the spring pins on the stand's uprights, adjust the height of the stand so the top platform sits at or slightly below the water surface (bottom platform should extend below the surface). Adjust the telescoping stops to fit the contour of the boat's side hull and hold the stand at the desired angle.

NEXT: Avery Ruff Stand Dog Platform -- MAX-7 Camo

UP: Duck Dog Stands, Blinds & Boat Ladders for Duck Hunting

PREVIOUS: Final Stand Dog Platform with Shoulder Strap by MOmarsh

link to original id

Questions? Since 1972, we're here to help. Call 1-800-624-6378 or 662-324-2410 and we'll answer any questions or take a phone order. Prefer email? Contact sales@gundogsupply.com. -- Steve Snell