CLOSEOUT: PetSafe Stay + Play Stubborn Wireless Rechargeable Pet Fence PIF00-13663

Higher stimulation levels for your stubborn or hard-to-train dogs.

What's New -- Improvements over the original PetSafe Wireless Fence:

Larger coverage area -- 105 ft. radius vs. 90 ft. radius

Quick-recharge Li-ion battery instead of disposable battery

Receiver collar is 25% smaller

Receiver collar has new ergonomic design for better fit

Receiver collar has an on/off button

Includes both long and short probes

Adds transmitter power loss alarm feature

Pass-through receiver allows use with any non-metallic 3/4" strap

Use with dogs weighing as little as 5 pounds

Overview:

The PetSafe Stay and Play Rechargeable Wireless Pet Fence lets you adjust the size of the circular containment boundary for your dog -- up to 3/4 of an acre! The waterproof receiver collar is safe for dogs weighing 5 pounds and up, and fits neck sizes from 6" - 28". Choose between tone-only mode and five levels of static correction. The quick charge collar takes only 2-3 hours to recharge and LED indicators let you know when the battery is getting low. Customize your receiver collar by adding any non-metallic 3/4" collar strap to the receiver. The Stay+Play Wireless Containment System is fully compatible with both the original Petsafe PIF-300 and the Free 2 Roam Wireless Containment Systems. Current PIF-300 owners can expand their wireless coverage with the Stay and Play transmitter or take advantage of the lightweight, rechargeable receiver collar.

How the Stay + Play Wireless Dog Fence Works:

The Petsafe Stay and Play provides the safest, simplest form of pet containment ever. You plug in the transmitter in an inconspicuous location in your home, and it emits a radio signal around your house. Your dog wears a lightweight receiver collar which listens for the signal. While it's receiving the signal, your dog is free to run and play. When the collar approaches the boundary of the signal area, it gives your dog a warning beep. If your dog continues, he receives a light static energy pulse which is startling but not harmful. With a little training that is simple and quick, your pet quickly learns his boundaries. Setting the boundaries of your yard takes only a few minutes by adjusting the range on the transmitter, from a radius of just a few feet to up to 105 feet.

Stay and Play Wireless Containment System Features:

Covers an adjustable circular area up to 3/4 acre

Collar receiver fits 6 to 28 inch necks

Completely portable -- no wire to bury

Rapid charge receiver collar charges in just 2-3 hours

Six adjustable levels of correction

Non-stimulating tone only mode for training

Low battery indicator

Waterproof receiver

Add more dogs with Additional Stay & Play Stubborn Collars

Sets up in 1-2 hours

Fully compatible with the original PIF-300 Petsafe Wireless Fence and Petsafe Free 2 Roam

System Includes:

Transmitter with AC adapter

Waterproof receiver with adjustable collar

Receiver charger

Operating and training guide

50 training flags

Test light tool

Short and long contact points

Contact point wrench

One year manufacturer warranty

Rechargeable Wireless Receiver Collar:

Uses a rechargeable Li-ion battery -- Instead of buying replacement batteries, just plug the collar in and it will be fully recharged in 2-3 hours. A full charge should last up to 3 weeks.

Smaller and lighter, with an ergonomic design for comfort

Select from 5 levels of static correction plus tone-only mode for training

Higher stimulation levels for stubborn or hard-to-train dogs

Fits dogs 5 pounds or more

Fits neck sizes from 6 to 28 inches

Low battery indicator

Waterproof

Pass-through receiver lets you replace the factory collar strap with any non-metallic 3/4" strap -- use different strap colors for different dogs

Add as many receiver collars to your Stay And Play system as you need

Collar charger included

Wireless Stay+Play Containment Transmitter:

Looks like a small household appliance -- blends in with your home decor

Circular adjustable boundary covers up to 3/4 acre (up to 105 foot radius)

Lightweight and portable

Transmitter dimensions: 9.5" x 9.5" x 9.75"

Power Loss Alarm notifies you if transmitter power has been lost

Overlap multiple transmitters to make a larger containment area

Training is Simple and Easy:

Once you have adjusted the signal to the perimeter you want, mark the boundary by placing small training flags at the edge of the signal area.

Using a leash and holding the collar, walk your dog around the boundary, pointing and shaking the flags, saying "NO" and letting your dog hear the beeping of the collar.

With your dog wearing the collar, walk the boundary again and let your dog venture into the signal area on his own and receive a correction. Quickly pull him back into your yard and praise and play with him, again pointing to the flags and saying "NO".

Repeat this process each day for a few weeks and your dog will quickly learn his new boundaries.

After thirty days, you can gradually remove the flags.

Stay and Play is Portable:

The Stay + Play is lightweight with no wires to bury

Great for containing your dog at home and everywhere else

Use anywhere you have an electrical outlet and more than 20 feet of land to cover

Once you reach your destination, program your system and reinforce your dog's boundaries by setting up boundary flags

Manufacturer FAQs:

1. Will the PetSafe Stay + Play Wireless Fence cover a larger circle than 210 feet across?

You can use another wireless transmitter with overlapping boundaries of at least 5-10 feet to increase the size of the pet area. 2. Can I use more than one Receiver Collar with the Stay + Play Wireless Fence?

Yes. There is no limit to the number of pets you can contain with the Stay + Play Wireless Fence. You must purchase an additional Wireless Pet Fence Receiver Collar for each pet. 3. Can I place the receiver on another collar?

Yes. You may use any 3/4 inch, non-metallic collar. 4. How do I charge the receiver collar?

To charge the receiver collar, lift and slide the receiver collar strap away from the front of the unit. Lift the rubber plug to allow access to the receiver charge jack. The rubber plug needs to remain attached to the receiver collar. Plug the receiver charger into the receiver charge jack on the receiver collar. The receiver charge jack and receiver charger are keyed to fit one way. Do not force it in backwards. The receiver collar light will glow red when the receiver charger is properly seated into the receiver charge jack. The light will turn green when charging is complete. A built-in safety circuit prevents the receiver collar from overcharging. 5. Do I need to perform maintenance on my Stay + Play Wireless Fence?

Check your pet's neck daily for irritation from the contact points.
Check the contact points on the receiver collar weekly to make sure they are clean.
Use the contact point wrench to make sure the contact points are secure. Do not over tighten.
Check the fit of the receiver collar weekly.
The receiver indicator light acts as a battery status indicator, flashing red every 4 to 5 seconds when battery charging is required.

Containment System Installation Guide and FAQ

Price: 274.99

Code: 7912

We ship these US48 only. We'll contact you with additional shipping / sales taxes or questions about your order.

Questions? We're here to help. Call 1-800-624-6378 or 662-324-2410 and we'll answer any questions or take a phone order.

Contents Field

NEXT: CLOSEOUT: PetSafe Stay + Play Wireless Instant Pet Fence PIF00-15001

UP: Petsafe Wireless Dog Fences & Collars

PREVIOUS: CLOSEOUT: Petsafe Instant Fence - Wireless Dog Fence PIF-300

link to original id

Gun Dog Supply home page

Questions? Since 1972, we're here to help. Call 1-800-624-6378 or 662-324-2410 and we'll answer any questions or take a phone order. Prefer email? Contact sales@gundogsupply.com. -- Steve Snell