Tri-tronics Replacement Collar/Receiver: G3 / G2 EXP (Additional Collar / Extra Receiver)

	STEVE SAYS: The EXP Collar/Receiver is for anyone that has a 1-dog Tritronics collar who needs to work more than one dog at a time. Compatible Across All Current Tri-tronics Sport / Field / Pro Systems Nowadays, every single Tritronics system uses the Tritronics EXP Collar/Receiver. It works with any G2, G2 EXP, or G3 system which covers most Tritronics products from the last four or five years. Mix and Match Collars and Transmitters Across All Current Tri-tronics Sport / Field / Pro Systems One of the really cool things about Tritronics collars is that they are compatible with all the other recent Tritronics transmitters. For example, say you have a Tritronics Sport Basic training collar for 1-Dog and you decide you want to upgrade to a Tritronics Pro 100. When you buy a Pro 100 1-Dog, it comes with a collar/receiver but now you can also add your Sport Basic collar/receiver and use BOTH with your Pro 100 transmitter, so you really have a Tritronics Pro 100 2-Dog. Or you can use both collars with your Sport Basic Transmitter. You can move them back and forth as often as you want to. Replace Older G2 Collars The EXP Collar/Receiver can also be used as a replacement for older Tritronics G2 systems which were NOT expandable. For example, say you need a replacement G2 collar because you've lost or damaged your G2 collar/receiver and don’t want to get it repaired; you can buy an EXP collar, and sync the collar with your G2 transmitter, and you are good to go. Collar Strap NOT Sold Separately The manufacturer DOES NOT include collar straps with additional EXP Collar/Receivers, so if you need a collar strap we offer them FREE OF CHARGE, but you gotta tell us! Click here for the FREE COLLAR STRAPS with Extra/Additional/Replacement EXP Collar Receivers.

Read more about the Tri-tronics Replacement Collar/Receiver: G3 / G2 EXP (Additional Collar / Extra Receiver)

For use with any G2 EXP or G3 Tri-Tronics system to expand your one dog system into a multidog unit. The EXP collar can also be used as a replacement collar for any G2, G2 EXP or G3 collar receiver.

The EXP receiver comes with a set of short contact points, a set of long contact points, a contact point wrench and instructions for matching it up to your transmitter.

Collar straps are not included with this receiver. If you need collar straps, we also offer Tri-Tronics EXP Receivers with FREE Hi-Flex Straps.

If you want a different type of strap, other collar straps are available separately including

• Tritronics Square Collar Straps with BLACK HARDWARE,
• Tritronics Square Buckle Collar Straps with NICKEL HARDWARE,
• and Tri-tronics Roller Buckle Collar Straps.
• If adding receivers 4 - 6 to the Classic 70 or Trashbreaker, a package of orange, green and yellow straps is available.

How to Match Additional Tri-Tronics EXP Collars to Your System

Please read all steps before starting.

1. Install strap of the desired color on the new collar and charge new receiver for two hours.



2. Set transmitter dog selection switch to the color of the strap.



3. Set transmitter intensity dial to a number, not a letter.



4. Turn the collar on.



5. Press and hold collar on/off button, then press and hold a "continuous" transmitter button. Hold both buttons down for about 5 seconds - until you hear two quick beeps (ignore the long beep that sounds right away). Release both buttons.



6. The collar will now be set to match your transmitter, and will be turned off.



7. Check for a successful match by turning the collar back on and pressing a "continuous" transmitter button. The collar light will turn on. If you are not planning to use the unit now, turn the collar off after testing.


If the transmitter does not operate the new collar, try the procedure again. If you are still having trouble, you can call Tri-Tronics Customer Service Department at 1-800-456-4343 for help.

Note for Classic 70 G2 EXP or Trashbreaker G2 EXP: When adding a receiver for dogs 1 - 3, use the button that matches the strap color and place the dog selection switch in the UP position. When adding a receiver for dogs 4 - 6, use the button inside the colored circle that matches the strap color and place the dog selection switch in the DOWN position.

Buy Tri-tronics Replacement Collar/Receiver: G3 / G2 EXP (Additional Collar / Extra Receiver)

Browse Previous Product: Tri-tronics EXP Extra Collar/Receiver with Tracer Light

Shop Next: Tri-tronics G3 EXP Receiver with Hi-Flex Collar Strap