Garmin TT25 Add-On GPS TRACKING + TRAINING Collar with Remote Beeper

Price: 599.99

Code: TT25BEEP-SD

Questions? We're here to help. Call 1-800-624-6378 or 662-324-2410 and we'll answer any questions or take a phone order.

Customize your TT25 with your choice of: Regular, MINI, or Ruggedized Flex Band Collar Strap Color --> Garmin TT25 with Remote Beeper Features: Integrated remote beeper Compatible with Alpha 300/200/10 series and PRO 550 PLUS handhelds Audibly track your dog's movements, such as running or "on point." Manually activate to find your dog in locate mode Choose from 5 different sounds: Single beep Double beep Triple beep Low beep Hawk sound Dynamic Tracking auto-adjusts the collar update rate based on your dog's activity (less movement=lower update rate) to extend the battery life to approx. 78 hours on a single charge Multi-colored remotely activated LED light beacons let you easily ID your dogs in low light conditions with 7 color options: white, yellow, magenta, cyan, green, red, and blue User-replaceable flex band reduces downtime if your collar gets damaged Multi-colored collar status indicator Blue: pairing mode Yellow: acquiring GPS signal Green: GPS signal established Red: low battery WiFi connectivity allows collar software to auto-update while charging "One-size-fits-most" collar design can be comfortably worn by both small and large dogs Remotely activated Sleep Mode further extends battery life (only with Alpha handhelds) Waterproof (1 ATM -- 10 meters) Top-mounted, high-sensitivity GPS / Galileo receiver gives better signal reception than GPS alone VIRB control on the collar lets you start or stop VIRB video recording with the Alpha handheld (VIRB camera not included) 18 levels of both continuous and momentary stimulation Non-stimulating vibration function Non-stimulating tone function User-replaceable 1" collar strap fits neck sizes between 11.5" and 22" 22 1/2" long-range braided steel collar antenna takes all the abuse a hunting dog can give it USB-C port on collar for manual software updates via Garmin Express and exporting additional GPS dog data Garmin TT25 w/ Beeper Collar Specifications: Dimensions: 1.4" H x 3.2" W x 1.8" D Weight: 12 oz. with collar strap and antenna Garmin TT25 w/ Beeper Collar Compatibility: ALPHA 300 / 200 / 10 Series PRO 550 PLUS NOT compatible with Astro handhelds Garmin TT25 w/ Beeper Battery Life: Up to 78 hours using dynamic tracking (default) Up to 25 hours with location updates every 2.5 seconds Up to 84 hours with location updates every 2 minutes Garmin TT25 w/ Beeper Comes With: Your choice of Standard, MINI, or Ruggedized (+$30) flex band--> Integrated beeper battery pack 1" collar strap in your choice of color Steel braided antenna USB-C cable Collar charging clip Short and long contact point sets with wrench Set of screws Owner's manual 1-year Garmin warranty Not available to Canadian addresses . This product is approved for use in the US only. Collar-to-handheld radio communication may be disabled in Europe and other prohibited areas. How to Pair Additional Garmin Collars to Your Alpha Please read all steps before starting. To pair wirelessly, the dog collar device must be within range of the Alpha handheld. 1. Hold the power button on the dog collar device until the device emits two series of beeps (about 2 seconds), and then release the power button. The status LED flashes blue. The dog collar device is now ready to be paired with a handheld. 2. On the handheld, select Dog List > Add Dog. 3. Select Pair Collar, and follow the on-screen instructions. 4. After successfully adding the dog collar device, enter the name of the dog, and select check mark. 5. Select a beacon color for this dog collar device, and select finish. How to Pair Additional Garmin Collars to Your PRO 550 PLUS Please read all steps before starting. 1. Charge the new receiver for two hours and install the desired color collar strap. 2. Turn on the handheld device. 3. Select a color with the toggle switch. The dog collar device will be assigned to this color. 4. Turn the intensity dial to N. 5. Press the green tone button. 6. Press the top training button. 7. Follow the on-screen instructions to select pair collar. 8. Follow the on-screen instructions to select auto, tree, or point for the type of dog wearing the collar. 9. The handheld device is now ready to pair. You can cancel pairing by pressing the green tone button. 10. If the dog collar device is on, turn it off. 11. Hold the power button on the dog collar device until the device emits two series of beeps (about 2 seconds), and then release the power button. The status LED flashes blue. The dog collar device is now ready to be paired with a handheld. 12. The handheld device will vibrate and a check mark will appear on the screen when the devices have paired successfully. NOTE: GPS signals must be established on both devices before the handheld device displays the dog collar device battery status, distance, and direction.

NEXT: Garmin T20 Add-On GPS TRACKING ONLY Collar

UP: Garmin ALPHA GPS Dog Tracking Collars

PREVIOUS: Garmin TT25 EXT Extended Battery Add-On GPS TRACKING + TRAINING Collar

link to original id

Questions? Since 1972, we're here to help. Call 1-800-624-6378 or 662-324-2410 and we'll answer any questions or take a phone order. Prefer email? Contact sales@gundogsupply.com. -- Steve Snell