Price: 170.99
Code: 7396
Questions? We're here to help. Call 1-800-624-6378 or 662-324-2410 and we'll answer any questions or take a phone order.
Original extra camo collar for the SportDOG SD 1825X Camo WetlandHunter. Includes 3/4" orange collar strap that fits up to a 23" neck , short and long contact points, charger and owners manual.
Compatible with the Following Systems:
SportDOG FieldTrainer SD-425X
SportDOG FieldTrainer SD-425XS Stubborn Dog
SportDOG WetlandHunter SD-425X Camo
SportDOG SportTrainer SD-575E
SportDOG SportHunter SD-825X
SportDOG SportTrainer SD-875E
SportDOG SportHunter SD-1225X
SportDOG SportTrainer SD-1275E
SportDOG SportHunter SD-1825X
SportDOG WetlandHunter SD-1825X Camo
SportDOG UplandHunter SD-1875
SportDOG HoundHunter SD-3225
SportDOG FieldTrainer SD-425
SportDOG FieldTrainer SD-425S Stubborn Dog
SportDOG WetlandHunter SD-425 Camo
SportDOG SportHunter SD-825
SportDOG SportHunter SD-1225
SportDOG SportHunter SD-1325
SportDOG SportHunter SD-1825
SportDOG WetlandHunter SD-1825 Camo
SportDOG ProHunter SD-2525
Synchronizing a Replacement Collar Receiver to your Transmitter
1. Turn off the Collar Receiver
2. Press and hold the On/Off Button. The Receiver Indicator Light will come on, then turn off in 4-5 seconds. If the On/Off Button is released too early, the Receiver Indicator Light will begin its normal flashing. If this occurs, start over and repeat from step 1.
3. After the Receiver Indicator Light has turned off, release the On/Off Button.
4. Press and hold the Upper Button on the Remote Transmitter until the Receiver Indicator Light flashes 5 times.
How to Program the Collar for Two-Dog Operation with the SD-1825X
1. Program the Remote Transmitter to mode 1, 2, 5, 6, or 7 with the toggle in the grey up position, or any mode with the toggle in the down position.
(Consult the SD-1825X Owners Manual for more information on Transmitter Modes.)
2. Flip the toggle switch in the grey up position, you can now program the
first Collar Receiver.
A. Turn off the Collar Receiver
B. Press and hold the On/Off Button. The Receiver Indicator Light will come on, then turn off in 4-5 seconds. If the On/Off Button is released too early, the Receiver Indicator Light will begin its normal flashing. If this occurs, start over and repeat from A.
C. After the Receiver Indicator Light has turned off, release the On/Off Button.
D. Press and hold the Upper Button on the Remote Transmitter until the Receiver Indicator Light flashes 5 times.
3. Program the second Collar Receiver the same way using A through D above, but with the toggle switch to the down position.
How to Program the Collar for Three-Dog Operation with the SD-1825X
1. Program the Remote Transmitter to mode 3 or 4 in the toggle up position.
(Consult the SD-1825X Owners Manual for more information on Transmitter Modes.)
2. Program the first Collar Receiver:
A. Turn the Collar Receiver off.
B. Press and hold the On/Off Button. The Receiver Indicator Light will come on, then turn off in 4-5 seconds. If the On/Off Button is released too early, the Receiver Indicator Light will begin its normal flashing. If this occurs, start over and repeat from A.
C. After the Receiver Indicator Light has turned off, release the On/Off Button.
D. Press and hold the Upper Button on the Remote Transmitter until the Receiver Indicator Light flashes 5 times. You may need to hold both units 2-3 feet from each other. If the Receiver Indicator Light does not flash 5 times, start over and repeat from A.
4. Program the second Collar Receiver using A through D above, but using the Lower Button in place of the Upper Button.
5. Program the third Collar Receiver using A through D above, but using the Side Button in place of the Lower Button.
How to Program the Collar for Six-Dog Operation with the SD-1825X
Repeat Steps 1-4 from "THREE-DOG OPERATION" above for dogs 1-3, then flip the toggle switch to the orange down position and repeat Steps 2-4 for dogs 4-6.
(Consult the SD-1825X Owners Manual for more information on Transmitter Modes.)Questions? Since 1972, we're here to help. Call 1-800-624-6378 or 662-324-2410 and we'll answer any questions or take a phone order. Prefer email? Contact sales@gundogsupply.com. -- Steve Snell