CLOSEOUT: PetSafe Little Dog Deluxe In-Ground FenceThe right size and right levels to keep your small dog close to home!No risk to you. Your 100% Satisfaction is Guaranteed with our 30 Day "No Questions" Money Back Guarantee. Hassle-free returns & exchanges.  This complete system for up to 1/3 acre includes a deluxe transmitter with power adapter, Little Dog Deluxe receiver collar for 6" to 16" neck sizes, 500 feet of wire, 50 training flags, test light tool, RFA-188 battery, and Operating and Training Guide. You can put as many dogs as you like on one system as long as they are each wearing a receiver collar. Additional collars sold separately. 4 Easy Steps to a Contained Pet!Features:How it Works:The system works by delivering mild Static Correction through two Contact Points that touch your pet's neck. If your pet crosses the established barrier, a correction will be sent to get your pet's attention, but will not harm your pet. The adjustable collar allows you to create a perfect fit for your pet. Plus, there are two sets of Contact Points to choose from depending on the length of your pet's coat.System Includes:Recommended Accessory: Protect your system with the Petsafe Lightning Protection Module available separately. Transmitter:Receiver Collar:Works for Most Property Shapes and Layouts Including:
In Ground Fence Installation Guide and FAQ Troubleshooting Your In-Ground Fence ("Short Loop Test"): If you are having an issue with your containment system, such as your pet has gotten in or out of your containment area without getting a static correction, you may need to perform what is referred to as a short loop test. A short loop test helps determine whether you are having a problem with your in-ground wire or with your equipment. Begin by unplugging your containment transmitter and open the lid. Disconnect your boundary wire and your ground wire if one exists. Set your boundary control width knob to 10. There is a switch on the side of your transmitter. If it reads "A, B, C," set the switch to B. If it reads "High/Low," set the switch to High. Cut a length of wire that is between 10 and 12 feet long and strip the wire coating off each end. Take this wire loop and connect each end to the two boundary wire terminals. Now plug your transmitter back in. Loosen the collar probes. Attach each end of the wire on the included Collar Test Light to one of the probes underneath the exposed piece. Go to your transmitter and your short wire loop. You may have to get as close as six inches to the transmitter and wire to test the receiver collar. If your transmitter and your receiver collar both test okay on the short loop test, but you are still having an issue (such as your receiver collar not activating whenever it gets near the boundary wire), you may have another issue such as a wire break. At this point, you should walk the containment area boundary and make sure that there isn't any activity that has disturbed your wire, such as digging or trenching. You should also check any area where you have spliced wire within your wire layout. Wire breaks tend to happen at splices, so check them and make sure no water damage or corrosion has occurred. If it has, redo your splices.
Customer ReviewsReview Summary
5.0
1 Reviews
5
100% (1)
4
0% (0)
3
0% (0)
2
0% (0)
1
0% (0)
100% Recommend this product (1 of 1 responses)
By Tim
Tower Michigan
Simple to Use - Plug and Play Technology
December 3, 2020
The product is an industry standard, if there are issues Gun Dog Supply answers the phone!
Pros
Cons
Little Dog Deluxe In-Ground Fence | ||||||||||
FREE SHIPPING on Orders $125+ |
 |  |  |
