Hound Heater Deluxe Dog House Furnace by AkomaNo risk to you. Your 100% Satisfaction is Guaranteed with our 30 Day "No Questions" Money Back Guarantee. Hassle-free returns & exchanges.  The Akoma Hound Heater Deluxe Dog House Furnace has the smallest footprint of any Hound Heater Dog House Furnace to date! It features a fan to circulate the heat within your dog's house, a 400-watt element for even more heating capacity, and a top-mounted thermostat for easy adjustments. Simply mount the unit, set the thermostat, and forget it! Can heat up to a 100 cubic foot dog house but works great for small dog houses as well. Includes illustrated step-by-step installation instructions. Dimensions: approx. 8"H x 6 1/4"W x 4"D Weight: approx. 6 1/2 Ibs. We do not recommend any loose bedding. Features: Average Temperature Ranges: Most people set their Hound Heater Furnace slightly above medium. Please remember that the size of your dog house, the amount of insulation, and the door greatly affect the Furnace's ability to reach any of these temperatures. Not UL listed. Installation Instructions: Tools Required: You will need a measuring device, drill, 1 1/8" wood bit, screwdriver, and three wood screws (not included). Step 1 -- The Hound Heater can be mounted on any side wall of your dog house. We recommend placing the heater as high as possible with a minimum of at least 3 inches from the ceiling. Step 2 -- Using the 1 1/8" drill bit, drill a hole through the wall of your dog house (a minimum of 9" from the ceiling) where the center of the Hound Heater will be placed. Step 3 -- Carefully feed the cord all the way through the previously drilled hole making sure the cord is not kinked. Step 4 -- Mount the heater with the temperature control knob towards the ceiling and the slant towards the floor using three wood screws or nuts and bolts. Lightly tuck the filter (included in box) in the space between the heater and the wall behind the temperature control knob. This will help prevent dog hair, dirt, and dust from getting in the heater and improve functionality. Clean the filter on a regular basis -- we recommend monthly. Step 5 -- Plug the unit into a GFI outlet. If you are using an extension cord, it must be a 3-wire, 18-gauge outdoor-rated grounded plug cord. Be sure the connection is elevated off any surface and not near water. Step 6 -- Set the thermostat to the desired temperature for your pet. (Medium setting is approximately 45-50 degrees F) NOTE -- The Hound Heater Deluxe Dog House Furnace is designed for side wall mounting only. Floor or ceiling mounting can result in permanent damage to your Hound Heater. For maximum effectiveness, it is important that your dog house is insulated and preferably has a door or flap.
Customer ReviewsHound Heater Furnace Deluxe | ||||||||||
FREE SHIPPING on Orders $125+ |
 |  |  |
