Transcript from Steve's Video:

This is the Garmin Tri-Tronics Pro 70. This is the workhorse of the Tri-Tronics line. It’s very similar to what they’ve been doing for the last decade. It’s a really simple design, one button per dog. And there really was not a whole lot to change to it. It’s perfect for folks that are running large numbers of dogs up to six from one transmitter and that need a problem solver.

When I say a problem solver, that’s what this collar is designed for. It is not what I would classify as a traditional training collar because of the stimulation levels. It’s a six level collar and it’s perfect for stopping dogs from bad behaviors—chasing off game, chasing cars, digging, any of that type of thing. It’s designed to stop dogs from doing things they are not supposed to be doing. But it cannot be used in a traditional manner as a remote training collar for me, as far as training a dog, because of the stimulation levels; the jumps between levels are pretty high. We’ll talk about that a little bit more.

This is a one button per dog collar. You’ll see it’s got three buttons across the front here. You’ve got Dog 1, Dog 2, Dog 3. You have a toggle switch. Kick that down and now it’s a 4, 5, 6. If you’ll notice, you have three different colors on the buttons, so your Dog 1 is black. Dog 2 is going to be red. Dog 3 is going to be blue. And then when you kick your toggle switch down, the rings around the buttons represent the collar strap colors. So you’ve got orange, green, and yellow. Your dial on the top has a couple of new things here. We’ve got beacon lights that are built into the collars. Then you’ve got tone. Then you’ve got your levels 1-6 for continuous stimulation.

There are several new features that are in the Pro 70. We have beacon lights that are built into the collar that can be remotely turned on and off from the transmitter. Then we also have a built-in bark limiter where you can take your collar and you can turn it into a bark collar. It’s not a remote bark collar in that you no longer have control over the stimulation from the transmitter. You actually have to activate it on the collar. That allows you to use it as bark collar when your dog is barking in the backyard, in the kennel, however you want to use it.

Beacon lights on the Pro 70 are activated from the transmitter. On the dial you have an L selection. That stands for lights. You turn your dial to L and then one button per dog, so we’re going to press the black button, beacon lights come on. When you are ready to cut them off, you press the button again and they turn off. So, on and off. This is independent for each dog. If you’ve got three or four different dogs running at one time and you want to turn the lights on, on one, turn the lights off on another, real simple to do from the transmitter.

The Pro 70 collar is very similar to what we’ve had in the past, except it’s smaller, which is going to be great especially for our folks that are running Beagles. It’s a little bit smaller collar. It also comes with a three-quarter inch collar strap. So, on a smaller dog, it’s going to look better. It’s going to fit them better. But it’s still going to be big enough for your biggest hound. So, not a problem there.

It’s similar to what we’ve had in the past. It’s got the same contact points that we’ve had for years. It comes with a regular. We also have long included, so if you have a thick-coated dog and you need to change it out, you can switch those out. You’ve got your on/off button. You’ve got your indicator light on the front. And then you’ve got your beacon lights.

The Garmin Pro 70 is an expandable system. What that means is that you can buy it as a one-dog system and then you can come back later and add collars 2-6 as needed. I’m going to show you real quick how to add a collar. It’s real simple.

Get your selector dial on the collar that you want. Right now we’re going to add Dog 2. I’ve got my Dog 1 in black. Now we’re going to add Dog 2, which is a red collar. To put the collar into the mode so you can sync it up, press the on/off button, hold it down. Green light is going to come on, blue light is going to come on, then it’s going to turn to yellow. Now hold down your red button and then you’ll hear it beep at you several times. Now it’s done and we are in here.

We’ll show you the lights. We’ll go to the lights on there. That turns on. And then if you want to activate your Dog 1, so now Dog 1 and Dog 2. Turn your lights off…and turn your lights off. Then to add Dogs 3-6 you just repeat the process.

The Pro 70 is a great collar for folks that are running multiple dogs and that they need that ease of operation, one button per dog. Garmin really has not changed this system all that much, and so that’s a good thing. It really wasn’t broken. It did not need to be fixed. And this is a great system, probably the most popular system that we have, especially for our Beagle folks. But it’s also real popular with people that are working more hang three dogs at one time. So if you are running 4-6 dogs at one time and you need a one-mile problem solver, the Pro 70 is the way to go.